Home Gumbox Designs Gum Campaigns Bin4Gum Shop Contact Us

Gumbox Ltd co reg 8695911 Copyright 2016

Home Fitting a Gumbox Fitting a Gumbox Fitting a Gumbox Fitting a Gumbox Fitting a Gumbox Fitting a Gumbox Fitting a Gumbox Fitting a Gumbox INSTALL

Basic installation of your chewing gum bin using a drill

1. Place the bracket where you want your chewing gum bin to be and then mark the holes

2. Always drill the lowest hole and then choose between the top and bottom. Rarely will you need all three

3. Fit the base plate to the bracket (Slotted one)

4. Screw through the lower hole and then which ever hole above was pre drilled.

5. Your GUMBOX Should look like this

6. Insert GUMBOX tube on to base. Make sure all the guides studs are inside the tube

7. Lower the cap onto the upper flange of the bracket and then make sure guides are all inside the tube

Now you are ready to put your waste gum in the GUMBOX